Set Up a Wireless internet connection in a minute in windows 8

Set Up a Wireless internet connection in a minute in windows 8

Turn your Wi Fi enabled PC or Laptop into Wi Fi router

I have created a Simple Dos file Which creat a Wi-Fi Ad Hoc network.You have to only give the network name and the key only

Disconnect from all the wi-fi network connections first

1-Download the Ad Hock File (hotspot.exe) - Download

2-Open it as an Adminstrator
3-Enter the Hotspot name and network key
Done creating the Hotsopt

4-Share the network connection

You need to allow Internet Connection Sharing  for your currently-active internet connection. Simply head over to Network & Sharing Center, and in the properties for the current internet connection, enable Internet Connection Sharing. Make sure to select the ad hoc connection under Home networking connection.

Done now you Have created a Wireless Ad Hoc Internet Connection In Windows 8
By using this you can play Multiplayer games Wifi Ftp and also you can share your internet connection with a computer or a bobile device .Laptop or PC ,3G 4G or Lan internet can be shared.
Tested on my windows 8.I think it will also work in windows 7 and XP as well

You can do this by usind some dos commands . How??>> Visit this post

How to do it in YOUTUBE ??? - http://youtu.be/Zelq03QXquI

How To Set Up Wireless Ad Hoc Internet Connection In Windows 8

How To Set Up Wireless Ad Hoc Internet Connection In Windows 8

Step 1: Launch Command prompt under Windows 8 (Run as Administrator ).

Step 2: Run the following command to verify that your network interface supports virtualization:

    netsh wlan show drivers

If Hosted network supported says Yes, you’re all set. Otherwise, you need to upgrade your hardware, if the software update doesn’t fix it.

Step 3: Now, set up the ad hoc wireless network using this command. Replace the parts in markup tags with your own choices

netsh wlan set hostednetwork mode=allow ssid=<HotSpot name> key=<Key 8 or more>

Step 4: Until now, your hosted network has been created. Now, you need to start it. Use the command below:

    netsh wlan start hostednetwork

Step 5:You need to allow Internet Connection Sharing  for your currently-active internet connection. Simply head over to Network & Sharing Center, and in the properties for the current internet connection, enable Internet Connection Sharing. Make sure to select the ad hoc connection under Home networking connection.

Done now you Have created a Wireless Ad Hoc Internet Connection In Windows 8
By using this you can play Multiplayer games Wifi Ftp and also you can share your internet connection with a computer or a bobile device .Laptop or PC ,3G 4G or Lan internet can be shared.
Tested on my windows 8.I think it will also work in windows 7 and XP as well

You can use a simple Ad hock app design by me to do this >> Visit this Post
you tube help ?? -

SONY Ericsson Xperia X10 Mini custom ROMS

SONY Ericsson Xperia X10 custom ROMS (not Mini Pro)

Worning
Iam not responsible if something bad happens to your device.You can continue at your own risk.Data loss is irreversible

in 4 Steps
1- Root
2- Unlock bootloader
3- Flash
4- Install the ROM

How to do it - Watch this Video - http://youtu.be/y4S-Oxjgy88

Bootloader unlock - click
Root - click
flashtool- click
ROMS and Kernels -Click


Go to the links for download the wanted files

impotent links - click

Xperia X10 Custom ROMs List Working Roms Tested in my Xperia X10 mini

Xperia X10 Custom ROMs List Working ROMs Tested in my Xperia X10 mini (not for xperia x10 Mini Pro)

All of these romes are tested in my Xperia X10 mini and worked well (with or withour some errors)
I am not responsible if something bad happens to your device.You can continue at your own risk

The ROM should match with the Kernel File
 
GinXperia (android 2.3.7)
Works with nAa 14 kernel

Download link - Click
 
SonyStyleRemix (android 2.3.7)
Works with nAa 14 kernel

Download link - Click

CyanogenMod 9 (Android 4.0.4 )
work with nAa ICS4 kernel
Download  link - Click

CyanogenMod 10 (Android 4.1 )
work with nAa JB2 kernel
Download  link - Click

More ROMs and More Kernels can be found in this link .But only above 4 links are tested by me

Flash your Xperia Wirh FlashTool

Flash your Xperia Wirh FlashTool
I am not responsible if something bad happens to your device.You can continue at your own risk

Flashtool is a flashing software that can be used to :

1. Flash original Images (Android 1.6, 2.1, 2.3 Images)
2. Root your phone
3. Install Recovery, Busybox, custom kernels
4. Clean your Rom (remove /system/apps apps of your choice) (Be careful, unless you really know what you do, do not modify the default list. This can make your phone stuck at the SE Logo)
5. Clear dalvik cache
6. Optimize (install of JIT v2) (Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
7. Customize (installs apps found in the custom/apps folder of the flashtool)
8. Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
9. Edit any text file on the device
10. Rebrand your device
    
    Download - Click

Root your Android with SuperOneClick

Root your Android with SuperOneClick

  I am not responsible if something bad happens to your device.You can continue at your own risk
Tested On My X10 Mini


1.  Extract SuperOneClick.rar to a folder on your desktop.
2.  Enable USB Debugging on your device.  To do this, go to Menu > Settings > Applications > Developer Options and tick the USB Debugging checkbox.
3.  Connect your device to your PC and if there are any drivers being installed at this point, let Windows to do so.
4.  From the folder you extracted above, run SuperOneClick.exe.
5.  Click on Root.

Download - Click or This